Home > Electrical > Parts >

JL Tazer Lite
JL Tazer Lite

Alternative Views:

Our Price: $219.00

Stock Status:In Stock

Product Code: JL-TAZER-LITE


Simple, plug-in installation – Tazer JL Lite simply plugs in, in place of your SGW module. Supports 2018+ Wrangler JL and Jeep Gladiator

Features are all accessed using the dash display, using steering wheel buttons to navigate the menus.

  • Vehicle Settings – which are changes made to the Jeep-like tire size, gear ratios,
    or change settings to accommodate other upgrades or modifications. These
    changes will continue to operate after the Tazer JL Lite is unplugged.

    Live Functions – which are functions the Tazer JL Lite performs live, only while
    plugged in.

    Vehicle Settings:
    – Change Tire Size
    – Change Gear Ratio
    – Change Transfer case LOW ratio
    – Enable/Disable TPMS system
    – Change TPMS pressure warning limit front/rear (25psi-85psi)
    – One-touch return-to-stock – Quick “unmarry” function returns all vehicle settings back to

    Live Functions:
    – AutoStopStart disable – remembers the last state of the auto stop-start system and will set it for
    you the next time you start the vehicle
    – AutoTracKill – remembers the last state of the traction control system and will set it for you the next
    the time you start the vehicle
    – Can disconnect sway bar in 2WD up to 30mph
    – Light Show mode – 6 preset and 3 make-your-own Light shows that flashes all the exterior
    lights, perfect for car shows/first responders/off-road visibility. Control from Key Fob or
    steering wheel buttons. Can be enabled for in-motion use for parades, off-road and legal
    – Cooldown mode: Turn engine fans on-demand when the ignition is on, engine not running
    – Line Lock: Can lock front brakes for an easy burnout
    – Rock Crawl: Can lock all four brakes by pressing steering wheel buttons to hold the vehicle
    still, especially helpful when off-road.
    – Winch Mode: Raise idle to 2000 RPM with a simple button press.
    – Display DTC’s – Shows the diagnostic codes that’s making the check engine light come on.
    – Clear CELs – Reset that pesky check engine light. Good when you have mods that set the
    light and you know exactly why.
    – 0 to 30 and 0 to 60 Timers – Displays 0-30 or 0-60 times on EVIC display
    – Firmware updates – the new firmware is available periodically, always free!

Share your knowledge of this product. Be the first to write a review »