Choose a Model

PARTS

TECH







Method Race Wheel 17x9 101 Machined Beadlock Fuel Trophy Forged Racing Wheel 17x8.5" 4.5" Back Spacing
Our Price: $449.95
Our Price: $795.95
From the deserts of Baja to the Rocky Mountains, the MR101 Beadlock is the premier wheel in off road racing. These light weight, raw machined wheels are beefed up in all the right places to give you the ultimate in strength. The beadlock ring is forged from 6061-aluminum and fastens using grade 8 zinc plated bolts. Sizes offered range from 15"-17". Refined over years of racing, the 101 Beadlock is the natural choice for the best off road vehicles. *Custom bolt patterns and finishes available. Forged Race Wheel - This wheel is amazing!  Custom Drill To Your Rig.
Teraflex JK 4 Door 3" Lift Kit w/ 4 FlexArms & 9550 Shocks Teraflex JK 4 Door 3" Elite LCG Long FlexArm Lift Kit
Our Price: $1,695.74
Our Price: $2,809.14
This system includes a 3" lift kit, shocks, front lower FlexArms and rear upper FlexArms, front swaybar disconnects, rear swaybar links, rear trackbar bracket, bumpstops and all necessary hardware. This kit will allow you to run up to a 35" tire (aftermarket wheels with 4.5" backspacing or less are required). Fits all JK Wranglers including Rubicon and Unlimited. Will provide an average of 4" of lift on 2 door JK models. The advantage and benefit of the TeraFlex Elite LCG suspension system for JK Wranglers is apparent the minute you put the pedal to the floor. With superior handling,responsive steering, ultimate off road performance, and customizable suspension geometry this system is miles ahead anything else out there. TeraFlex continues to dominate the off road market, and the Elite LCG reinforces that position. The handling and performance of the Elite long arm system over any other kit - long or short on the market is simply amazing. The long upper and lower FlexArms work in tandem to provide synchronized suspension movement and articulation that does not bind or limit travel. The suspension travel is maximized through correct control arm geometry that reduces the extreme control arm angles, an inherent problem with short arm lifts. This correct geometry also eliminates most of the front-to-back movement of the axle as it cycles in its motion, keeping the wheel centered in the wheel-well through all suspension travel. The new FlexArm mounting points properly address critical handling areas of anti-squat on the rear, and anti-dive on the front. A factory style 4-link suspension with trackbar provides the best handling and performance for on-road drivability and allows the JK to track tight through corners and at highway speeds. The trackbars provide excellent lateral stiffness to keep the axle properly centered under the vehicle for the strongest suspension configuration possible. The Low Center of Gravity philosophy has been implemented in this system to ensure that maximum ground clearance and suspension ability has been maximized while keeping the total center of gravity as low as possible for premium handling and control. The difference is immediate and the advantage is TeraFlex.
Reid Wrangler JK Driver Side High Steer Knuckle Teraflex JK HD Hinged Carrier & Adjustable Spare Tire Mounting Kit
Our Price: $265.00
Our Price: $664.99
Reid Driver Side JK High Steer Knuckle The TeraFlex Heavy Duty Adjustable Tire Carrier & Tailgate Reinforcement Kit is designed to carry up to a 37" tire over the most extreme trails and obstacles, and provide easy and immediate access to the rear cargo area with a single action. The TeraFlex Heavy Duty Adjustable Tire Carrier & Tailgate Reinforcement Kit spreads the load and weight of the tire to more than just one hinge point. Incorporating and using the factory tailgate hinge mounting points spread and separate the load as far apart as possible, resulting in maximum strength and durability. Dedicated tooling provides a cast A356.2 T6 Aluminum main component. This keeps the carrier as light, and strong as possible. The fit and finish is designed to follow the flow and contour of the Jeep body, while seamlessly providing additional mounting points for off road accessories such as recovery jack and fluid containers. The factory Jeep tub provides substantial internal gussets and bracing that easily supports the new tire carrier and oversized tire. The HD hinge brackets are forged steel and the HD 5/8" hinge pins are constructed from cold formed high-carbon hardened steel. The combination of mounting location and HD mounting brackets provides one of the strongest, rattle-free tire carriers on the market today. The TeraFlex HD tire carrier removes all stress from the gate by utilizing the HD reinforcement carrier as the load-carrying component, in effect it carries the weight of the tailgate assembly and the spare tire.